Microsoft word - 2011_144_retention +_powders

MATERIAL SAFETY DATA SHEET
Page 1 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 1. PRODUCT IDENTIFICATION
RETENTION+ POWDERS
METHACRYLATE COPOLYMER BLEND
PROFESSIONAL USE ONLY
1.6 Distributor's CREATIVE NAIL DESIGN, INC.
1.7 Distributor's 1125 JOSHUA WAY VISTA, CA USA 92081
CHEMTREC: +1 (800) 424-9300 / +1 (703) 527-3887
+1 (800) 833-NAIL (6245), +1 (760) 599-2900
2. HAZARD IDENTIFICATION
This product is not classified as a HAZARDOUS SUBSTANCE or as DANGEROUS GOODS according to the classification criteria of
NOHSC:1008 (2004) and ADG Code (Australia).
Routes of Entry: NO Ingestion:
Effects of Exposure:
EYES:
Possible irritation from dust.
Irritation. Allergic contact dermatitis is possible with prolonged or repeated contact.
INGESTION:
No exposure effects are reported.
INHALATION: Considered a nuisance dust. May cause irritation of the mouth, nose, throat, and lungs.
Symptoms of Overexposure:
EYES:
Redness & watering.
Redness, itching, drying of skin.
INGESTION: No symptoms are expected.
INHALATION: Upper respiratory irritation, including coughing & sneezing.
Acute Health Effects:
EYES:
Possible irritation from dust.
Irritation. Allergic contact dermatitis is possible with prolonged or repeated contact.
INGESTION: No exposure effects are reported.
INHALATION: Considered a nuisance dust. May cause irritation of the mouth, nose, throat, and lungs.
Chronic Health Effects:
None known.
Eyes, skin and respiratory system.
NA = Not Available; ND = Not Determined; NE = Not Established; NF = Not Found; C = Ceiling Limit; See Section 16 for Additional Definitions of Terms Used. Note: All WHMIS required information is included. It is located in appropriate sections based on the ANSI Z400.1-2010 format.

MATERIAL SAFETY DATA SHEET
Page 2 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 3. COMPOSITION & INGREDIENT INFORMATION
EXPOSURE LIMITS IN AIR (mg/m3)
ACGIH NOHSC
CHEMICAL NAME(S)
RTECS No.
EINECS No.
TLV STEL TWA STEL PEAK PEL STEL IDLH
POLYETHYL METHACRYLATE
9003-42-3
>30.0
ACRYLATES COPOLYMER
25685-29-4 NA
>30.0
(10) NA NA DUST
BENZOYL PEROXIDE
DM8575000 202-327-6
MAY CONTAIN:
TITANIUM DIOXIDE
13463-67-7 XR2275000 236-675-5 > 1-3 (10)
(15) NA NA TOTAL
CI 77120 (BARIUM SULFATE)
7727-43-7
CR0600000 231-784-4
CI 15850 (RED 7)
5281-04-9
QJ1975000 226-109-5
OTHER COMPONENTS PRESENT IN LESS THAN 1% CONCENTRATION
THE REMAINING COMPONENTS DO NOT CONTRIBUTE ANY
SIGNIFICANT ADDITIONAL HAZARDS
4. FIRST AID MEASURES
Flush eyes thoroughly with copious amounts of water for at least 15 minutes, holding eyelid(s) open to ensure complete
flushing. If irritation persists, seek immediate medical attention.
Remove contaminated clothing and wash affected areas with soap and water. Wash all contaminated clothing
thoroughly before reuse. If irritation persists, seek medical attention.
INGESTION: Contact ChemTrec at +1 (703) 527-3887 or the nearest Poison Control Center or local emergency telephone number for
assistance and instructions. If vomiting occurs spontaneously, keep victim's head lowered (forward) to reduce the risk of
aspiration.
INHALATION: Remove victim to fresh air at once. Under extreme conditions, if breathing stops, perform artificial respiration and seek
medical attention.
Medical Conditions Aggravated by Exposure:
Pre-existing dermatitis, asthma or bronchitis.
5. FIREFIGHTING MEASURES
Flashpoint & Method:
579°F (304 °C) TCC
5.2 Autoignition 5.3 Flammability Lower Explosive Limit (LEL): Upper Explosive Limit (UEL): Fire & Explosion Hazards:
NA
5.5 Extinguishing Carbon dioxide, dry chemical & water spray as authorized.
5.6 Firefighting Keep containers cool until well after the fire is out. Prevent runoff from fire control or dilution from
entering sewers, drains, drinking water supply, or any natural waterway. Firefighters should wear full
face, self-contained breathing apparatus (MSHA/NIOSH approved or the equivalent) and impervious
protective clothing.

MATERIAL SAFETY DATA SHEET
Page 3 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 6. ACCIDENTAL RELEASE MEASURES
Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment.
For small spills (e.g., < 1 gallon (3.785 liters)) wear appropriate personal protective equipment (e.g., goggles, gloves). Spilled product
should be swept or vacuumed up immediately to prevent falls. Dispose of properly in accordance with local, state and federal
regulations. Wash all affected areas and outside of container with plenty of warm water and soap. Remove any contaminated
clothing and wash thoroughly before reuse.
For spills ≥ 1 gallon (3.785 liters), deny entry to all unprotected individuals. Spilled product should be swept or vacuumed up
immediately to prevent falls. Transfer to containers for proper disposal. Wash all affected areas and outside of container with plenty
of warm water and soap. Remove any contaminated clothing and wash thoroughly before reuse. Keep spills and cleaning runoffs
out of municipal sewers and open bodies of water.
7. HANDLING & STORAGE INFORMATION
Work & Hygiene Practices:
Use eye protection when using this product. Wash hands thoroughly after using this product and before eating, drinking, or smoking.
Storage & Handling:
Use and store in a cool, dry, well-ventilated location (e.g., local exhaust ventilation, fans). Keep away from excessive heat. Do not
store in damaged or unmarked containers or storage devices. Keep containers securely closed when not in use.
Empty containers may retain residual amounts of product. Therefore, empty containers should be handled with care. The product is
a fine powder, and may cause a slipping and falling hazard if spilled. Spilled product should be swept or vacuumed up immediately
to prevent falls.
8. EXPOSURE CONTROLS & PERSONAL PROTECTION
Ventilation & Engineering Controls:
General mechanical ventilation (e.g., fans) and local exhaust ventilation is recommended for use with this product.
Respirators are not required for use with this product. However, this product is a nuisance dust hazard. Product may cause irritation of
the mouth, nose, throat, and lungs. Accordingly, when working with large quantities (> gallon (3.785 liters)) a dust mask is suggested.
A respiratory protection program that meets OSHA's 29 CFR §1910.134 and ANSI Z88.2 requirements must be followed whenever a
respirator is used.
Safety glasses with side shields should be used when using this product.
None required under normal conditions of use. May cause skin irritation in some sensitive individuals.
When handling large quantities (e.g., ≥ 1 gallon (3.785 liters)), wear rubber or impervious plastic gloves.
No apron required when handling small quantities.
When handling large quantities (e.g., ≥ 1 gallon (3.785 liters)), eye wash stations and FLAMMABILITY
deluge showers should be available. Upon completion of work activities involving
large quantities of this product, wash any exposed areas thoroughly with soap and PHYSICAL HAZARDS
PROTECTIVE EQUIPMENT A
EYES

MATERIAL SAFETY DATA SHEET
Page 4 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 9. PHYSICAL & CHEMICAL PROPERTIES
Approximately 200°C
Appearance & Color: White or light pink powder with faint bland odor.
Insoluble
10. STABILITY & REACTIVITY
Stable under normal conditions of use (see section 7).
Hazardous Decomposition Products:
Oxides of carbon and nitrogen.
Highly unlikely, but will occur if large quantity of product comes in contact with an equally large quantity of monomer.
High heat 120 °F (48.8 °C) and proximity to monomers. (Large quantities only, e.g. > 1 gallon (3.785 liters)).
10.5 Incompatible Monomer. (Large quantities only, e.g. > 1 gallon (3.785 liters)).
11. TOXICOLOGICAL INFORMATION
This product has NOT been tested on animals to obtain toxicology data. There are toxicology data for the components of the
product, which are found in scientific literature. These data have not been presented in this document.
See section 2.5
See section 2.6
11.5 Reproductive This product is not reported to produce reproductive toxicity in humans
This product is not reported to produce mutagenic effects in humans.
This product is not reported to produce embryotoxic effects in humans.
This product is not reported to produce teratogenic effects in humans.
Reproductive Toxicity: This product is not reported to produce reproductive effects in humans.
Irritancy of Product:
See section 2.3
Recommendations: Treat symptomatically.

MATERIAL SAFETY DATA SHEET
Page 5 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 12. ECOLOGICAL INFORMATION
12.1 Environmental This product will slowly volatilize from soil. Components of this product will slowly decompose into organic compounds.
Effects on Plants & Animals:
There is no specific data available for this product.
Effects on Aquatic Life:
There is no specific data available for this product.
13. DISPOSAL CONSIDERATIONS
Dispose of in accordance with all federal, state, and local regulations.
14. TRANSPORTATION INFORMATION
The basic description (ID Number, proper shipping name, hazard class & division, packing group) is shown for each mode of transportation. Additional descriptive information may be required by 49 CFR, IATA/ICAO, IMDG, SCT, ADGR and the CTDGR. 14.1 49 NOT REGULATED
NOT REGULATED
NOT REGULATED
NOT REGULATED
NOT REGULATED
NOT REGULATED
NOT REGULATED
15. REGULATORY INFORMATION
U.S. EPA SARA Title III Reporting Requirements:
This product does not contain any substances with SARA reporting requirements.
U.S. EPA SARA Title III Threshold Planning Quantity (TPQ):
This product does not contain any substances with a SARA threshold planning quantity.
U.S. TSCA Inventory Status:
All chemical substances of this product are listed on the TSCA inventory or are otherwise exempt from inventory status.
U.S. CERCLA Reportable Quantity (RQ):
This product does not contain any substances with a CERCLA reportable quantity.
Other U.S. Federal Requirements:
This product complies with the appropriate sections of the Food and Drug Administration's 21 CFR Subchapter G, (Cosmetics).
Other Canadian Regulations:::
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all of
the information required by the CPR. The components of this product are listed on the DSL/NDSL. None
of the components of this product are listed on the Priorities Substances List.
U.S. State Regulatory Information:
No component of this mixture is listed in the California Proposition 65 Lists.
Titanium dioxide (CAS# 13463-67-7); can be found on the following state right to know lists: New Jersey, Pennsylvania, Minnesota, and
Massachusetts.

MATERIAL SAFETY DATA SHEET
Page 6 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2011 15. REGULATORY INFORMATION - continued
European Union 67/548/EEC and Australia NOHSC:2011 (2003) Requirements: Component(s) of this product are listed in Annex I of EU Directive 67/548/EEC.
Acrylates copolymer: Irritant, (Xi). R: 36/37/38 Irritating to eyes, respiratory system and skin.
Benzoyl peroxide: Irritant, (Xi). R: 43 May cause sensitization by skin contact. S: 3/7 Keep container
tightly closed in a cool place.
Titanium dioxide: Harmful, (Xn). R: 21/22 Harmful if swallowed and in contact with skin. S: 7/8-24 Keep
container tightly closed and dry. Avoid contact with skin and eyes.

S: 20/21 When using do not eat, drink or smoke
16. OTHER INFORMATION
WARNING: Precisely follow directions and MSDS (available through your supplier) for use. Avoid skin and eye contact. Keep out of reach of children. If redness or other signs of adverse reaction occur, discontinue use immediately and thoroughly rinse affected area. FOR PROFESSIONAL USE ONLY. Terms & Definitions:
Please see last page of this MSDS.
16.3 Disclaimer: This Material Safety Data Sheet is offered pursuant to OSHA's Hazard Communication Standard, 29 CFR §1910.1200. Other government regulations must be reviewed for applicability to this product. To the best of ShipMate's & Creative Nail Design's knowledge, the information contained herein is reliable and accurate as of this date; however, accuracy, suitability or completeness are not guaranteed and no warranties of any type, either expressed or implied, are provided. The information contained herein relates only to the specific product(s). If this product(s) is combined with other materials, all component properties must be considered. Data may be changed from time to time. Be sure to consult the latest edition. Creative Nail Design, Inc.
A Division of Colomer U.S.A., Inc.
1125 Joshua Way
Vista, CA 92081 USA
(800) 833-NAIL (6245)
+1 (760) 599-2900 phone
+1 (760) 599-4005 fax
http://www.cnd.com/
ShipMate, Inc.
PO Box 787
Sisters, OR 97759-0787 USA
+1 (310) 370-3600 phone
+1 (310) 370-5700 fax
e-mail: [email protected]

MATERIAL SAFETY DATA SHEET
Page 7 of 7
CND-N-144
Prepared to OSHA, ACC, ANSI, NOHSC, WHMIS & 2001/58 EC Standards MSDS Revision: 1.0 MSDS Revision Date: 04/18/2008 DEFINITION OF TERMS
A large number of abbreviations and acronyms appear on a MSDS. Some of these that are commonly used include the following:
GENERAL INFORMATION:
OTHER STANDARD ABBREVIATIONS:
Chemical Abstract Service Number EXPOSURE LIMITS IN AIR:

American Conference on Governmental Industrial Hygienists Threshold Limit Value U.S. Occupational Safety and Health Administration Permissible Exposure Limit Self-Contained Breathing Apparatus Immediately Dangerous to Life and Health NATIONAL FIRE PROTECTION ASSOCIATION: NFPA
REACTIVITY
FIRST AID MEASURES:
HAZARD RATINGS:
Cardiopulmonary resuscitation - method in which a person CPR whose heart has stopped receives manual chest compressions
and breathing to circulate blood and provide oxygen to the HAZARDOUS MATERIALS IDENTIFICATION
PRECAUTIONS
SYSTEM: HMIS
HEALTH, FLAMMABILITY & REACTIVITY RATINGS:
TOXICOLOGICAL INFORMATION:
LD50 Lethal Dose (solids & liquids) which kills 50% of the
exposed animals s PERSONAL PROTECTION RATINGS:
Lethal concentration (gases) which kills 50% of the Concentration expressed in parts of material per mil ion Lowest dose to cause a symptom TCLo Lowest concentration to cause a symptom
TDlo, LDlo, & LDo or Lowest dose (or concentration) to cause lethal or toxic
TC, TCo, LClo, & LCo
International Agency for Research on Cancer National Toxicology Program Registry of Toxic Effects of Chemical Substances Bioconcentration Factor Median threshold limit log KOW or log KOC
Coefficient of Oil/Water Distribution REGULATORY INFORMATION:
Consult your supervisor or S.O.P.
WHMIS Canadian Workplace Hazardous Material Information System
for special handling directions.
U.S. Department of Transportation Transport Canada U.S. Environmental Protection Agency Canadian Domestic Substance List Face Shield &
Safety Glasses
Splash Goggles
Canadian Non-Domestic Substance List Eye Protection
Canadian Priority Substances List U.S. Toxic Substance Control Act European Union (European Union Directive 67/548/EEC) Synthetic Apron
Full Suit
Dust Respirator
Canada's Controlled Product Regulations
EC INFORMATION:
Dust & Vapor
Full Face
Vapor Respirator
Respirator
Respirator
Hood/Mask or
Note: the dotted circle indicates that this respiratory
protective equipment is required for high concentrations
or for large volume spills or releases of product.
C E F N O T+ Xi Xn
Corrosive Explosive Flammable Harmful Oxidizing Toxic Irritant Harmful FLAMMABILITY LIMITS IN AIR:
WHMIS INFORMATION:
Minimum temperature required to initiate combustion in air Temperature
with no other source of ignition Lower Explosive Limit - lowest percent of vapor in air, by volume, that wil explode or ignite in the presence of an Upper Explosive Limit - highest percent of vapor in air, by A B C D1 D2 D3 E F
volume, that wil explode or ignite in the presence of an ignition source Compressed Flammable Oxidizing Toxic Irritation

Source: https://www.intercosmetics.ca/images/uploads/MSDS/CND/PO-Retention+Powders-CND-N-144-Rev1.0.pdf