Section:

MATERIAL SAFETY DATA SHEET
SECTION: 1.1 PRODUCT IDENTIFICATION
Product Name: Melt & Pour Soap Base Suspending
Product Use:
CAS #: n/a Country of Origin: SECTION: 1.2 COMPANY IDENTIFICATION
Company Name:
Saffire Blue Inc.
Address:
1444 Bell Mill Road, Tillsonburg, ON N4G4G9 Canada Tel: 519-286-0295 • Toll Free: 877-248-1115 24 HOUR EMERGENCY TELEPHONE NUMBER: (613)-996-6666 CANUTEC
SECTION: 2. COMPOSITION / INFORMATION INGREDIENTS
Component % Range Aqua 30 to 100% Propylene glycol 10 to 30% Sodium Stearate 10 to 30% Glycerin 3 to 10% Sucrose 3 to 10% Sodium Laurate 3 to 10% Sodium Laureth Sulphate 3 to 10% Sorbitol 3 to 10% Silica 1 to 3 % Sodium Chloride 0.3 to 3% Stearic Acid 0.3 to 1% Lauric Acid 0.3 to 1% Pentasodium Pentetate 0.1% or less Tetrasodium Etidronate 0.1% or less SECTION: 3. HAZARDS IDENTIFICATION
May Cause irritation of eyes with contact. This product does not have a workplace exposure limit and is not classified as hazardous. Hazardous Ingredient Information: none known. SECTION: 4. FIRST AID MEASURES
Eye Contact:
Contact with eyes can produce burning sensation. Irrigate with water immediately, continue flushing eyes with water for 15 minutes. Seek medical attention if irritation persists. Inhalation:
Remove product from airways. Consult a doctor. Ingestion:
Give plenty of warm water and consult a physician immediately. Do not induce MSDS: Melt & Pour Soap Base Suspending MATERIAL SAFETY DATA SHEET
vomiting. Never-give anything by mouth if victim is unconscious, is rapidly-losing or is convulsing. Skin Contact:
Remove contaminated clothing wash with plenty of water. Seek medical attention if irritation persists. SECTION: 5. FIRE FIGHTING MEASURES
Flammable Limits:
Extinguishing media:
Carbon Dioxide, dry chemical or foam. Cool surrounding area with water spray. Special Procedures:
Determine the need to evacuate or isolate the area according to your local emergency plan. Unusual Firefighting Hazards:
None identified. Protective Equipment:
Self-contained breathing apparatus and protective clothing should be worn when fighting fires involving oils or chemicals. Combustion Product:
Carbon Monoxide, Carbon Dioxide SECTION: 6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Avoid contact with eyes. See section 8. Safety Precautions:
Eliminate all ignition sources. Ventilate area. Determine the need to Evacuate or isolate the area according to your local emergency plan. Environmental Precautions:
Keep away from drains, surface and ground water. Report spills to appropriate Authorities if required. Methods For Cleaning Up:
Contain and collect with appropriate tools and place in suitable container for disposal. Comply with all federal, state, and local regulation. Sweep up small spill. Clean with hot water. SECTION: 7. HANDLING AND STORAGE
Handling:
Avoid contact with skin and eyes. Good personal hygiene practices should be used. Wash after any contact, before breaks and meals, and at the end of the work period. Contaminated clothing and shoes should be cleaned before re-use. Storage:
Containers should be kept closed in order to minimize contamination. Store in a cool, dry, well ventilated place protected from light. Keep away from extreme heat and away from all sources of ignition Make sure the material does not come into contact with substances listed as: "Materials to Avoid". SECTION: 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Eyes Protection:
The use of safety glasses is recommended. If a material is to be handled in a manner where splashing may occur, the use of splash goggles is recommended. Respiratory Protection:
In well- ventilated areas, respiratory protection is not normally required. Protective Gloves:
Using chemical resistant gloves is recommended. Protective Clothing:
Using chemical resistant clothing is recommended. Protective Equipment:
An eyewash fountain and/or safety shower should be available in the MSDS: Melt & Pour Soap Base Suspending MATERIAL SAFETY DATA SHEET
work area. Acceptable industrial hygiene practices should be maintained. SECTION: 9. PHYSICAL AND CHEMICAL PROPERTIES
Colorless transparent solid. Characteristic odor. Miscible in water. 7.5 – 8.5 (neat @ 75 deg. C) SECTION: 10. STABILITY AND REACTIVITY
Stability:
Chemically stable. This material presents no significant reactivity hazard. Conditions to Avoid:
Avoid sparks, flame and excessive heat. Materials to Avoid:
Strong oxidizing agents. Flammability:
Hazardous Polymerization:
Hazardous Combustion or
Decomposition Products:
When heated to decomposition produces carbon dioxide and monoxide smoke. SECTION: 11. TOXICOLOGICAL INFORMATION
Inhalation:
There may be irritation of the throat with a feeling of tightness in chest. Skin Contact:
Adverse skin effects should be prevented by normal care and personal hygiene. Eye Contact:
May irritate eyes. Ingestion:
Low order toxicity causing irritation of the stomach and intestines which results in nausea and vomiting. Medical Conditions Aggravated
by Exposure:
Due to its use in cosmetics, no adverse effects are expected. Chronic Toxicity:
May cause mild irritation of skin and eyes. Carcinogenicity Data:
None of the components of this material are listed as a carcinogen. Reproductive Toxicity:
No adverse effects on reproduction are known. Acute Toxicity Values:
No data is currently available. SECTION: 12. ECOLOGICAL INFORMATION
May affect pH of aquatic environment. Ecotoxicity is low. This material will readily biodegradable with no bioaccumulation potential. Avoid any pollution of ground, surface or underground water. SECTION: 13. DISPOSAL CONSIDERATION
Dispose of in accordance with local, provincial and federal regulations. Check with disposal expert to ensure compliance. SECTION: 14. TRANSPORT INFORMATION
US DOT Shipping Description: Not regulated
MSDS: Melt & Pour Soap Base Suspending MATERIAL SAFETY DATA SHEET
IATA Shipping (Air):
IMDG Shipping Description:
SECTION: 15. REGULATORY INFORMATION
CAS#: n/a FEMA: n/a FDA: n/a WHMIS: n/a
SECTION: 16. OTHER INFORMATION
Revision Date: April 30, 2012

SECTION: 17. DISCLAIMER
The information contained in this Certificate of Analysis and Material Safety Data Sheet is obtained from current and reliable sources. The information contained herein is true and to the best of Saffire Blue Inc. knowledge. Nothing herein should be interpreted as a recommendation to infringe existing patents or violate any Laws or Regulation. Final determination of the suitability of the material is the sole responsibility of the user. Customers should purchase products from Saffire Blue Inc. with the clear understanding that all products must be used at the customers own discretion and only after referencing Material Safety Data Sh (MSDS) and all other relevant technical information specific to the product. Saffire Blue Inc. shall not be held responsible for any damages to property or for any adverse physical effects (including injury or bodily harm) caused by insufficient knowledge or the improper use of a product. The user of the product is solely responsible for compliance with all laws and regulations applying to the use of The products, including intellectual property rights of third parties. As with any manufacturing process, Saffire Blue Inc. strongly recommends small lab scale testing for evaluation purposes prior to full commercial manufacturing. The information on the Saffire Blue Inc. website is obtained from current and reliable sources but makes no representation as to its comprehensiveness or accuracy. Nothing contained herein should be c onsidered as a recommendation by Saffire Blue Inc. as to the fitness for any use. As the ordinary or otherwise use(s) of this product is outside the control of Saffire Blue Inc., no representation or warranty, expressed or implied is made as to the effect(s) of such use(s) (including damage or injury), or the results obtained. The liability of Saffire Blue Inc. is limited to the value of the goods and does not include any consequential loss. Saffire Blue Inc. shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.
MSDS: Melt & Pour Soap Base Suspending CERTIFICATE OF ANALYSIS
Product:
Melt & Pour Soap Base Suspending
Best Before:
Store in air tight container; in a cool dry area; away from direct sunlight. Properties
Appearance:
Colorless transparent solid. ER: he information contained in this Certificate of Analysis is obtained from current and reliable sources. Sa ffire Blue Inc. provides the information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. Individuals receiving this information must exercise their independent judgment in determining its appropriateness for a particular purpose. As the ordinary or otherwise use(s) of this product is outside the control of Saffire Blue Inc., no representation or warranty, expressed or implied, is made as to the effect(s) ofsuch use(s), (including damage or injury), or the results obtained. Saffire Blue Inc. expressly disclaims responsibility as to the ordinary or otherwise use(s). Furthermore, nothing contained herein should be considered as a recommendation by Saffire Blue Inc. as to the fitness for any use. The liability of Saffire Blue Inc. is limited to the value of the goods and does not include any consequential loss. Saffire Blue Inc. shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon. Saffire Blue Inc. shall not be responsible for any damages resulting from use of or reliance upon this information. The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties.
Saffire Blue Inc.
1444 Bell Mill Road, Tillsonburg, ON N4G4G9 Canada Tel: 519-286-0295 • Toll Free: 877-248-1115

Source: https://www.saffireblue.ca/shop/docs/MSDS/MSDS-MELT-POUR-SUSPENDING.pdf